Desensitizing action: FSodium fluoride and potassium ions.
Excellent viscosity:Does not run off the tray.
High Yield: Each syringe of 3g yields up to 9 applications.
Recommended daily use time:
• 10% and 16%- 3 to 4h or overnight. • 22% - 1 h.
• Whitening of vital teeth using the take-home whitening technique supervised by a dentist.
Step by step
Register the teeth shade so that the dentist and the patient can have a comparison parameter for the whitening. Recording of teeth shade can be made using a shade guide or a photograph.
Molding: molding can be made with alginate and must properly copy all teeth that will be whitened.
Mold is made of stone-gypsum, in order to prevent bubbles. It is not necessary to relief the model to create gel shells.
Place the 1mm acetate plate Whiteness Plates for Molds (FGM) into the thermal laminator until forming a slight bending due to the heat. Then, pull the plastic-state plate over the gypsum model, so the suction can thermal format the mold into the model. The plate’s removal must be made after it has fully cooled down.
After removing the mold from the model, cut it without burrs and to cover 1 to 2mm of the gums margin.
Mold test: the mold must not compress the soft tissue, nor present excessive gaps.
Show to the patient the quantity of gel that should be applied to the tray. One drop of gel must be put into the areas corresponding to the vestibular faces of the teeth that will be whitened. Usage time: 3 to 4 hours per day for concentrations between 10 and 16%, and 1 hour per day for 22% concentration.
The regular consultations of the patient should be scheduled on weekly basis, until completing the treatment. Record the final shade achieved.